Anyone do this? I'm considering using my 2nd monitor for RWR and other screens.
http://server.3rd-wing.net/public/Boull ... .1_ENG.pdf
Multi monitor setup??
Moderator: RLG MGMT Team
-
PanzerMeyer
- Posts: 4795
- Joined: 10 Feb 2004, 08:54
- Location: Miami, Florida
Re: Multi monitor setup??
When DCS introduced the ability to use a second monitor to exclusively display the SHKVAL screen for the KA-50 I considered getting a second monitor but then realized that I didn't have the necessary space to accommodate two monitors. I also then realized that I just preferred to have one really large monitor than to have two smaller monitors.
I have learned from experience that a modicum of snuff can be most efficacious - Baron Munchausen
Re: Multi monitor setup??
Roger. I will give this a try and post results. I have a 19" widescreen and then a square 17" for other stuff on the side.
Re: Multi monitor setup??
Ive been tempted to try something like this....Just need to get my hands on an old Tablet
https://www.digitalcombatsimulator.com/ ... s/3308547/
Let us know how it goes...
https://www.digitalcombatsimulator.com/ ... s/3308547/
Let us know how it goes...
Re: Multi monitor setup??
I will be doing this when I get my 2 MFD's going in my Harrier pit.
Re: Multi monitor setup??
I was going to say, there are plenty of folks out there that buy MFD for auxiliary displays. I'm sure Xpen can point you to what to purchase.
Re: Multi monitor setup??
If I can jump in, I have used a multimonitor setup for almost a decade. DCS does it rather well, once you sort out it's quirks. I mainly use it for running Helios on a second monitor. The guide you linked to looks out of date. Two main things to be aware of for DCS:
1. You have to use an export .lua file defining the locations of the video feeds you want to send to the second monitor. You want to put this in your saved games file, not the main game.
2. You have to calculate the combined pixel count of both monitors and set up a virtual monitor in your monitor size section of options. I found it most efficient to set up the monitors used for DCS in a top/bottom configuration to match my physical setup, as well as to make the math a bit easier.
Remember though, that both the export, and the increased pixel count is going to go against your frame rate. When I switched to a 55" 4K TV for a main monitor, I could really tell the difference, and had to make some adjustments. My pixel count went through the roof! I recently pulled the 24" touchscreen I was using as I found that with the bigger and much clearer main monitor, I didn't need Helios so much, and was barely using it. But it was not for technical reasons with DCS.
There is no longer any need for 3rd party software to set up multi monitors in DCS. But, if you want a quick way to cheat, you can use Capt. Zeen's export .lua from his website, and just delete/comment out the lines you don't need.
For things like multiple mini displays inside a cougar, etc. the same principals apply. Just arrange them in Windows, do the math, and tell DCS your custom screen size, etc.
For a single second monitor of any decent size, take a look at Helios, it's free, and makes setup easy. https://github.com/HeliosVirtualCockpit/Helios/releases
Hope this helps a little bit.
1. You have to use an export .lua file defining the locations of the video feeds you want to send to the second monitor. You want to put this in your saved games file, not the main game.
2. You have to calculate the combined pixel count of both monitors and set up a virtual monitor in your monitor size section of options. I found it most efficient to set up the monitors used for DCS in a top/bottom configuration to match my physical setup, as well as to make the math a bit easier.
Remember though, that both the export, and the increased pixel count is going to go against your frame rate. When I switched to a 55" 4K TV for a main monitor, I could really tell the difference, and had to make some adjustments. My pixel count went through the roof! I recently pulled the 24" touchscreen I was using as I found that with the bigger and much clearer main monitor, I didn't need Helios so much, and was barely using it. But it was not for technical reasons with DCS.
There is no longer any need for 3rd party software to set up multi monitors in DCS. But, if you want a quick way to cheat, you can use Capt. Zeen's export .lua from his website, and just delete/comment out the lines you don't need.
For things like multiple mini displays inside a cougar, etc. the same principals apply. Just arrange them in Windows, do the math, and tell DCS your custom screen size, etc.
For a single second monitor of any decent size, take a look at Helios, it's free, and makes setup easy. https://github.com/HeliosVirtualCockpit/Helios/releases
Hope this helps a little bit.
-
PanzerMeyer
- Posts: 4795
- Joined: 10 Feb 2004, 08:54
- Location: Miami, Florida
Re: Multi monitor setup??
Hmmm...
I have learned from experience that a modicum of snuff can be most efficacious - Baron Munchausen
Re: Multi monitor setup??
Thanks for the great advice. I will tinker with this when I get time.
Re: Multi monitor setup??
That's great info. Definitely gets the wheels spinning....