OOPS!!
Moderator: RLG MGMT Team
OOPS!!
Well what can i say.
I had bad accident yesterday, involving an angle grinder and my left middle and index fingers!
I was trying to shape some wall tiles for the arched doorway in my kitchen, so decided the best way to get the curved cut required was with my small angle grinder
To cut a long story short (No pun intended) The angle grinder slipped and started shapping the afforementioned fingers. Luckily the middle finger got off lightly with just some outer layers of skin being removed, but my index finger got cut into just below the first knuckle conecting it to my hand and went deep enough to cut the Tendon on the top of the finger.
So a Trip to the Local A&E at hospital was called for where i waited 2 hours before i got looked at and told it would need stitches (not to bad i said) but after an initial inspection the doctor said it looked like i had damaged the Tendon and it might need surgery, so i had to wait a further 2 hours before an orthopeadic doctor looked at it and he said that the Tendon had been cut and would definitely need surgery to connect the two ends up again.
So after a further 3 hours i finally got admitted as an in patient for the night and got operated on last night.
Woke up at about 23:00 and got put in a ward with several old gentlemen one of which would not stop screaming all night, he was over reacting to whatever was wrong with him as even the Nurse told him to shut up as he was making so much noise (he's been there 2 days and seemingly had been shouting and screaming since he arrived).
Anyway, got let out at 16:00 today (that guy was still screaming). So after 2 days of no food, I last ate on Saturday night and 24 hours of no sleep apart from getting operated on, i am back home with my left hand almost useless as i only have 2 fingers and the thumb free with threst of my hand bandaged and in a splint for the Next 6 WEEKS!
So lesson learned to be more carefull with my tools and very luck not to have lost my fingers all together.
All i can say now is OUCH!
I had bad accident yesterday, involving an angle grinder and my left middle and index fingers!
I was trying to shape some wall tiles for the arched doorway in my kitchen, so decided the best way to get the curved cut required was with my small angle grinder
To cut a long story short (No pun intended) The angle grinder slipped and started shapping the afforementioned fingers. Luckily the middle finger got off lightly with just some outer layers of skin being removed, but my index finger got cut into just below the first knuckle conecting it to my hand and went deep enough to cut the Tendon on the top of the finger.
So a Trip to the Local A&E at hospital was called for where i waited 2 hours before i got looked at and told it would need stitches (not to bad i said) but after an initial inspection the doctor said it looked like i had damaged the Tendon and it might need surgery, so i had to wait a further 2 hours before an orthopeadic doctor looked at it and he said that the Tendon had been cut and would definitely need surgery to connect the two ends up again.
So after a further 3 hours i finally got admitted as an in patient for the night and got operated on last night.
Woke up at about 23:00 and got put in a ward with several old gentlemen one of which would not stop screaming all night, he was over reacting to whatever was wrong with him as even the Nurse told him to shut up as he was making so much noise (he's been there 2 days and seemingly had been shouting and screaming since he arrived).
Anyway, got let out at 16:00 today (that guy was still screaming). So after 2 days of no food, I last ate on Saturday night and 24 hours of no sleep apart from getting operated on, i am back home with my left hand almost useless as i only have 2 fingers and the thumb free with threst of my hand bandaged and in a splint for the Next 6 WEEKS!
So lesson learned to be more carefull with my tools and very luck not to have lost my fingers all together.
All i can say now is OUCH!
Lose Sight! Lose The Fight!8)
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
- PanzerMeyer
- Posts: 4795
- Joined: 10 Feb 2004, 08:54
- Location: Miami, Florida
Well good to hear you get to keep the fingers, hope it a; heals up good soon. So ??do you at least get a week off work
Now for next time never ever use angle grinders for cutting tiles, always use a proper tile saw or at least mount the angl grinder so it ca not move and free hand the tole itself. Worked in a tool rental so um ya given enough safety speached to drive people nuts lol
http://www.amazon.com/Pro-Grade-Bench-T ... 40&sr=1-35
Now for next time never ever use angle grinders for cutting tiles, always use a proper tile saw or at least mount the angl grinder so it ca not move and free hand the tole itself. Worked in a tool rental so um ya given enough safety speached to drive people nuts lol
http://www.amazon.com/Pro-Grade-Bench-T ... 40&sr=1-35
Me to Panz, as although it sounds like i have a six week break from work, i can't do S**t! As i can only use one hand, and Yes i have already tried using my throttle on my X52 and can just about slide it back and forth and even after losening the tensioner on it, its still very difficult as i can't grab it as such. But using the buttons is near impossible, but i am sure i'll adapt quick enough or it's going to be one long boring 6 weeks watching day time telly.
Veg i got a tile cutter like that but it don't cut curves hence the angle grinder.
Veg i got a tile cutter like that but it don't cut curves hence the angle grinder.
Lose Sight! Lose The Fight!8)
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
- PanzerMeyer
- Posts: 4795
- Joined: 10 Feb 2004, 08:54
- Location: Miami, Florida
-
- Posts: 1051
- Joined: 12 May 2001, 17:00
- Location: Oklahoma
man Nem sounds like a bad one, im in the construction trade so i see stuff like this sometimes.. what type of blade you have on that angle grinder? sheesh... ive actualy used diamond bit dremel tools for cutting tile. but sounds like you had alot to do with a arch....
i know about emergency rooms. spent 6 hours with a nail in my arm waiting for a doc.. got 2 xrays and sent home and had to wait 2 days to have em operate to get it out, it was pinning the muscles togather hehe.
get better soon!
i know about emergency rooms. spent 6 hours with a nail in my arm waiting for a doc.. got 2 xrays and sent home and had to wait 2 days to have em operate to get it out, it was pinning the muscles togather hehe.
get better soon!
Well, i will be trying to fly but! since all my Radar controls are on my throttle as well as chaff and flares A/A is going to be troublesome. Actual throttle control is possible with some loss of speed in doing so, so it looks like A-10 is the way to go in lomac.
Tying my shoe laces has become a new and exciting challenge in the mornings and even telling myself well the least i can do is help the wife out with house work, is also out of my abilities on most jobs as i can't clean dishes, vacuming could possible but very cumbersome when i have to move the machine about as we have a compact vacum not a sand up one. Dusting should be ok though and i can't take the three dogs for a walk as i can't grab anything with my left hand and controlling three dogs with one hand is nigh on impossible at the moment.
So my wife is going to have a rough time as well with all the work she'll have to do and i think that annoys me more than most about this whole thing, since i feel fine and am fully cabable of moving around but with one hand trussed up the way it is, I'm as good as useless for doing most things.
Shit happens as they say.
Tying my shoe laces has become a new and exciting challenge in the mornings and even telling myself well the least i can do is help the wife out with house work, is also out of my abilities on most jobs as i can't clean dishes, vacuming could possible but very cumbersome when i have to move the machine about as we have a compact vacum not a sand up one. Dusting should be ok though and i can't take the three dogs for a walk as i can't grab anything with my left hand and controlling three dogs with one hand is nigh on impossible at the moment.
So my wife is going to have a rough time as well with all the work she'll have to do and i think that annoys me more than most about this whole thing, since i feel fine and am fully cabable of moving around but with one hand trussed up the way it is, I'm as good as useless for doing most things.
Shit happens as they say.
Lose Sight! Lose The Fight!8)
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
Probabaly the only thing that is still possible FalkerFalker wrote:can you still grab a bud light ? , okay then , whew...
BSG will be on the SciFi channel tomorrow if you get it over there. Happy Healing !
I have the complete BSG boxed DVD set starting at the Mini series to the end of season 3. So i can have marathon sessions at BSG at the moment and i could also watch Firelfly again
Lose Sight! Lose The Fight!8)
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
- PanzerMeyer
- Posts: 4795
- Joined: 10 Feb 2004, 08:54
- Location: Miami, Florida
LOL Pity you cant film me here at the computer trying to fly that would be a lot more fun to watch.VEGETA wrote:I will be his wingman and have Fraps at the ready
I should be OL tonight but might not stay for as long as usual, If my fingers start giving me trouble. Since despite not being able to move them my brain still tries to and this can cause them to give a little pain after a while , but if it gets too difficult i could stay out of the fight and help you guys as an observer . but if we play IL2 i could just jamm the throttles on full and fly with my right hand .
Lose Sight! Lose The Fight!8)
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
Barrie "Nemisis" Brownlee
[img]http://img201.exs.cx/img201/2690/nemisissignature0xl.gif[/img]
- PanzerMeyer
- Posts: 4795
- Joined: 10 Feb 2004, 08:54
- Location: Miami, Florida
I can also load up some missions with level bombers and you can be one of the turret gunners! That shouldn't put too much stress on your fingers. :-)Nemisis wrote: , but if it gets too difficult i could stay out of the fight and help you guys as an observer . but if we play IL2 i could just jamm the throttles on full and fly with my right hand .
I have learned from experience that a modicum of snuff can be most efficacious - Baron Munchausen
- Jedi Master
- Posts: 1364
- Joined: 11 Feb 2004, 14:32
- Location: Melbourne, FL